Unit 6 Reflection

This unit focused on biotechnology, which is the use and manipulation of living things and their parts for human benefit. There are 4 main applications of biotech: industrial and environmental, agricultural, medical/ pharmaceutical, and diagnostic research. In the industrial and environmental field, there is fermentation as well as biofuels (using cellulase to break down cellulose into simple sugars as well as fermentation to produce alcohol for the fuel). Medical and pharmaceutical biotechnology includes gene therapy. Gene therapy is inserting a copy of a healthy gene into a person who has a defective copy of that gene. An example of agricultural biotechnology is classical breeding, where individuals with a certain desired trait are bred several times. GMO, or transgenic organisms, have had recombinant DNA inserted into them. I felt that I understood this overview of biotechnology fairly well. There are also certain ethical questions that are asked of the field of biotechnology, called bioethical questions. Bioethics is the study of decision-making as it applies to certain advances in biology and medicine.

One technology in the field of biotech is recombinant DNA (rDNA). It is taking DNA from one organism and inserting it into another. The first step in this is to identify the gene of interest and the location and the sequence. Restriction enzymes are very specific enzymes which cut DNA whenever they read a specific sequence. They make a jagged cut and create two "sticky ends" that can bond with other DNA. Plasmids, which are circular DNA in bacteria, are naturally resistant to a certain antibiotic. I felt that this topic was one of my strengths, especially after doing the Recombinant DNA Lab, where we modeled inserting the insulin gene into a plasmid that was resistant to tetracycline, and only the bacteria with the plasmid would survive.

Model of recombinant plasmid

Another technology of biotech is PCR (Polymerase Chain Reaction), which is a procedure that creates millions of copies of a sequence of DNA so that that sequence can be analyzed. The DNA is denatured with heat, primers are annealed to the single-stranded DNA above and below the gene, DNA Polymerase are extended, and the process is repeated. Gel electrophoresis uses electricity to separate DNA fragments based on size, since the larger fragments travel more slowly than the smaller fragments. 

In the pGLO Lab , we added a plasmid which contained GFP (Glowing Fluorescent Protein) to E.coli. There were 4 plates: -pGLO LB, -pGLO LB/amp, +pGLO LB/amp, and +pGLO amp/ara. The bacteria on the -pGLO plate formed a carpet of colonies. The -pGLO LB/amp plate had no growth. The +pGLO LB/amp plate had roughly 130 colonies, and the +pGLO LB/amp/ara had 150 colonies and glowed green under UV light. This lab helped me understand the process We also did the Candy Electrophoresis Lab, where we put four reference dyes (Blue 1, Red 40, Yellow 6, Yellow 5) into four wells. Then we extracted dyes off of candies, such as purple skittles, blue m&m's, red skittles...etc and inserted them into remaining wells. We were able to compare the size of the fragments and identify if any of the reference dyes were present in the candies. From this lab, I was able to better understand how gel electrophoresis works and how to analyze the results. 

Candy Electrophoresis Lab 

I want to learn more about gene therapy and the advances in this technology that are being made today that are getting us closer to the "GATTACA" world. I also wonder about the ethical questions that go along with so many of these advances in gene therapy. 

This year, one of my new year's goals was to actively study for tests in biology. And so far, I have done exactly that. I have studies a few weeks ahead of time, made note cards, and I studied what I had difficulty with first. This has really hepled me prepare for this test, and I will continue doing so!

PGLO Lab

 

pGLO Observations , Data Recording & Analysis

1.

Obtain your team plates.  Observe your set of  “+pGLO” plates under room light and with UV light.  Record numbers of colonies and color of colonies. Fill in the table below. Plate Number of Colonies Color of colonies under room light Color of colonies under   UV light - pGLO LB lawn yellow yellowish white - pGLO LB/amp 0 NA NA + pGLO LB/amp 62 yellow white + pGLO LB/amp/ara 350 yelow green

2.	What two new traits do your transformed bacteria have?
	The resistance to ampicillin and the GFP gene were the new traits our transformed bacteria had.
3.	Estimate how many bacteria were in the 100 uL of bacteria that you spread on each plate. Explain your logic.
	Each colony started with 1 bacteria. There would have been between 62 and millions of bacteria first. This is because 62 was the least number of colonies and it could have gone up to millions.
4.	What is the role of arabinose in the plates?
	The role of arabinose is to make the bacteria glow green by letting the RNA Polymerase through to the gene.
5.	List and briefly explain three current uses for GFP (green fluorescent protein) in research or applied science.
	The GFP is used because of its ability to generate a glowing color. GFP is used as a active indicator for protease action because then the scientists would know that it is working. Another reason why GFP is used is because it can glow inside an organism so the scientists could see what goes on inside the organisms cell. The third use is GFP is used for Biosensors, which allows you to analyze different conditions, like pH levels.
6.	Give an example of another application of genetic engineering.

In medicine, genetic engineering has been used to mass produce human growth hormones, insulin, monoclonal antibodies, vaccines and many more.

Candy Electrophoresis Lab

Although none of our dyes traveled in the wrong direction or mixed colors, there were some minor differences between the reference dyes and the ones we were testing. For example, our red and orange were darker than the reference colors, whereas the reference dyes for blue and yellow were darker than ours. However, I think this can be attributed to the amount of dye we extracted from the candy. I did not find any major variance between the distance traveled by reference and test.

I think that citrus red 2 will migrate similar to the blue 1, carminic acid will go about as far as our red 40, fast green FCF should go about as far as yellow 6, and betanin will be about the same distance as yellow 5. This is my hypothesis because although they aren't the same colors and size of molecules, the order of dyes that we tested, yellow 5, yellow 6, red, blue will correspond to betanin, fast green FCF, carminic acid, and citrus red 2. In other words, although the chemicals won't go as far as the dyes (due to their size), they should order up in the way specified above.

Dog food manufacturers probably put food coloring in the dog food to entice the dogs to eat it. Most dog food does not consist of things that a dog would naturally be fed, so to get the dog to eat up, they need to use artificial flavoring, coloring and smells.

In my food I found the artificial dyes red 40, yellow 5, yellow 6, and blue 1. I also found 2 natural dyes in cereal: annato extract color, and turmeric extract color. I found most of these dyes in cereals and sauces. It surprised me that I found the exact same dyes that we tested in the lab. I then searched the dyes up and learned that they are four of the seven permitted food colorings in the US.

The 2 factors that control the distance the dye travels is the dye's size, and how long you leave the gel in the electrophoresis box. In addition, I also think that the overall charge of the dye must also play a part in the direction it travels.

The force that moves the dye through the gel is the electromagnetic force. It is propagated through the current, caused by the voltage difference from the red cathode to the black one.

The reason why smaller dyes travel farther than large molecules of dye is because of the porous nature of the gel. Because the dye is inserted into the wells, they travel through the gel rather than on top. Thus, smaller dye molecules find it easier to navigate the cave-like environment found inside the gel.

Because DNA molecules of this size are so much larger than the dyes, I expect them not to travel as far. For this reason, it is necessary to leave the electrophoresis going for longer to see a difference in the distance traveled by each molecule of DNA.

Recombinant DNA Lab

  In this lab, we imitated the process of inserting plasmid into a bacteria plasmid. Our plasmid had a resistance to kanamycin. We found a restriction enzyme that cut a segment out of the DNA and cut the plasmid open. We used an enzyme that was closest to the insulin gene. Then we combined the DNA and plasmid with Ligase(tape). In order to test if bacteria took our plasmid, we would use kanamycin because our plasmid has a natural resistance to it and if the bacteria survived then the insertion was successful. We wouldn't use tetracycline or ampicillin because it would kill our bacteria. Restriction enzymes are proteins that bind to a segment of DNA and cut it. The one we used was Eco R1 since it cut the the human gene in two places close to the insulin gene and cut the plasmid in only one l place. If the restriction enzyme cut the bacteria in more than one place, then the lygase would not know where to attach the insulin gene to.  This is important in every day life, because it is used to create many vaccines and medicines, by making bacteria that can produce these products. This technology can also be used to create GMO foods, such as fruits that spoil more slowly.

New Year Goals

1. I will make varsity soccer next year

• I will drink milk and protein every day to become taller
• I will go to the weight room at least once every week
• I will go for a 4 mile jog at least twice every week

2. I will study for tests more efficiently by doing the following:

• I will make note cards for each main topic
• I will not start studying a few weeks ahead of time instead of the last few days
• I will first study what I am having difficulty with